1 Identification of substance:
-
Product details:
-
Trade name: Zinc telluride
-
Manufacturer/Supplier:
Institute of Solid State Physics,
Russian Academy of Sciences,
Laboratory of Physical-Chemical Basis of
Crystallization(LPCBC).
Chernogolovka, Moscow district, 142432 Russia.
Phone:+7-(496)-522-2074
Fax:+7-(496)-522-4691
E-mail: lpcbc82@issp.ac.ru
|
2 Hazards identification
-
Hazard description: Xn Harmful
-
Information pertaining to particular dangers
for man and environment
R 20/22 Harmful by inhalation and if swallowed.
|
3 First aid measures
-
After inhalation
Supply fresh air. If required, provide artificial
respiration. Keep patient warm.
Seek immediate medical advice.
-
After skin contact
Immediately wash with water and soap and rinse
thoroughly.
Seek immediate medical advice.
-
After eye contact
Rinse opened eye for several minutes under
running water. Then consult a doctor.
-
After swallowing Seek immediate medical
advice.
|
4 Fire fighting measures
-
Suitable extinguishing agents
Product is not flammable. Use fire fighting
measures
that suit the surrounding fire.
-
Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.
|
5 Accidental release measures
-
Person-related safety precautions:
Wear protective equipment. Keep unprotected
persons away. Ensure adequate ventilation
-
Measures for environmental protection:
Do not allow material to be released to the
environment without proper governmental permits.
-
Measures for cleaning/collecting:
Dispose contaminated material as waste according
to item 12. Ensure adequate ventilation.
|
6 Handling and storage
-
Handling
-
Information for safe handling:
Keep container tightly sealed.
Store in cool, dry place in tightly closed
containers.
Ensure good ventilation at the workplace.
-
Information about protection against explosions
and fires:
No special measures required.
-
Storage
-
Requirements to be met by storerooms and receptacles:
No special requirements.
-
Information about storage in one common storage
facility:
Store away from acids and oxidizing agents.
-
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed
containers.
|
7 Exposure controls and personal
protection
-
Additional information about design of technical
systems:
Properly operating chemical fume hood designed
for hazardous chemicals and having an average face velocity of at least
100 feet per minute.
-
Personal protective equipment
-
General protective and hygienic measures
The usual precautionary measures for handling
chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing
immediately.
Wash hands before breaks and at the end of
work.
-
Breathing equipment:
Use suitable respirator when high concentrations
are present.
-
Protection of hands: Impervious gloves
-
Eye protection: Safety glasses
-
Body protection: Protective work clothing.
|
8 Physical and chemical properties:
-
Form: Crystal chunks, Polycrystals, Single
crystals, Substrates and optical elements manufactured from the
crystals.
-
Color: Brown, reddish
-
Odor: odorless
-
Value/Range Unit Method
-
Melting point/Melting range:
1307 °C
-
Boiling point/Boiling range:
Not determined
-
Sublimation temperature / start:
Not determined
-
Flash point:
Not applicable
-
Ignition temperature:
Not applicable
-
Decomposition temperature:
Not determined
-
Danger of explosion:
Product does not present an explosion hazard.
-
Explosion limits:
Not applicable
-
Vapor pressure: Negligible
at room temperature
-
Density:
5.633 g/cm3 (crystal)
-
Solubility in / Miscibility with
-
Water:
Insoluble
|
9 Stability and reactivity
-
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored
according to specifications.
-
Materials to be avoided: acids and oxidizing
agents
|
10 Toxicological information
-
Primary irritant effect:
-
on the skin: Irritant to skin and mucous
membranes.
-
on the eye: Irritating effect.
-
Sensitization: No sensitizing effects known.
-
Additional toxicological information:
To the best of our knowledge the acute and
chronic toxicity of this substance is not fully known.
|
11 Ecological information:
-
General notes:
Do not allow material to be released to the
environment without proper governmental permits.
|
12 Disposal considerations
-
Product:
-
Recommendation
Consult local or national regulations for
proper disposal.
-
Uncleaned packagings:
-
Recommendation:
Disposal must be made according to official
regulations.
|
13 Transport information
-
DOT regulations:
-
Hazard class:
6.1
-
Identification number:
UN3284
-
Packing group:
III
-
Proper shipping name (technical name):
Tellurium compound, n.o.s., zinc telluride
-
Land transport ADR/RID (cross-border)
-
ADR/RID class:
6.1 Poisonous substances
-
Item:
57c
-
Danger code (Kemler):
60
-
UN-Number:
3284
-
Description of goods:
Tellurium compound, n.o.s., zinc telluride
-
Maritime transport IMDG:
-
IMDG Class:
6.1
-
UN Number:
3284
-
Packaging group:
III
-
Proper shipping name:
Tellurium compound, n.o.s., zinc telluride
-
Air transport ICAO-TI and IATA-DGR:
-
ICAO/IATA Class:
6.1
-
UN/ID Number:
3284
-
Packaging group:
III
-
Proper shipping name:
Tellurium compound, n.o.s., zinc telluride
|
14 Regulations
-
Product related hazard informations:
-
Hazard symbols: Xn Harmful
-
Risk phrases: 20/22 Harmful by inhalation
and if swallowed.
-
Safety phrases:
9 Keep container in
a well-ventilated place.
36 Wear suitable protective
clothing.
-
National regulations
All components of this product are listed
in the U.S. Environmental Protection Agency Toxic Substances Control Act
Chemical Substance Inventory.
-
Information about limitation of use:
For use only by technically qualified individuals.
|
15 Other information:
Employers should use this information only
as a supplement to other information gathered by them, and should make
independent judgement of suitability of this information to ensure proper
use and protect the health and safety of employees. This information is
furnished without warranty, and any use of the product not in conformance
with this Material Safety Data Sheet, or in combination with any other
product or process, is the responsibility of the user.
-
Department issuing MSDS: LPCBC ISSP Rus.
Acad. Sci.
|